Molten Metal Pyrometer with Jumbo Display (4 Inch Display) – LMI-2014

Molten Metal Pyrometer with Jumbo Display (4 Inch Display) – LMI-2014

Product Description :

LMI-2014 – Molten Metal Pyrometer with Jumbo Display

Libratherm offers 32-bit microcontroller-based Molten Metal Pyrometer models LMI-2014 and LMI-2018, which are designed to measure the temperature of ferrous and non-ferrous molten metals using disposable thermocouple tips.

The molten metal temperature measurement is carried out by dipping the TIP for 3 to 4 seconds. In this short measurement time, the accurate reading is to be captured. Simultaneously, the operator will be guided through the measurement cycle by audio/visual alarms for Thermocouple Continuity, Measurement in Progress, and Measurement Over. LMI-2014/LMI-2018 combines 3 independent Libratherm models (LMI-2010 + LRU-2010-4″ OR 8″ + LLC-2010) combined in a single enclosure. Additionally, both models are available with single-sided or double-sided display versions. The operator can view the readings from either side if installed on the ceiling.

Any error during measurement due to thermocouple open conditions is immediately detected and informed by activating the audio/visual alarm.

SPOT Measurement (SM): LMI-2014/LMI-2018 are designed to measure and display the molten metal temperature in a concise time interval (3 to 5 seconds). The pyrometer is rugged, reliable, field-proven, and very easy to operate. Users can select desired thermocouple type (R, S, or B) and set other parameters using the front panel heavy-duty keyboard. During measurement, the indicator ignores the slag temperature, and the Average or Plateau reading is determined using the advanced algorithm, the same is latched and displayed on the bright 7 segments 4″ or 8″ red LED display. The last 100 readings are stored in the built-in memory and can be recalled as and when required.

Added Features: LMI-2014/2018 has the facility to work with Single DIP Thermocouple TIPS (SDT) and Multi DIP Thermocouple TIPS (MDT). The system comes to READY mode whenever the new TIP is connected to the Lance or when the same TIP is reused for multiple measurements.

Key Features :

Microcontroller based design
4 inches and 8 inches bright red 7 segments LED display (Single-sided and Double-sided)
Field-proven and time-tested measurement algorithm
Accepts R, S, B type thermocouple tips
User-selectable unit of measurement oC/oF
Spot and Continuous measurement – user selectable
Built-in memory of last 100 readings
Usable with Single DIP tip (SDT) and Multi DIP tips (MDT)
Display of previous measurement reading till the next measurement starts
Calibration facility with Ambient and without Ambient temperature
Unique feature of Single side display or Double-side display

Parameters	Description
Input	R, S, and B type thermocouple ,(user selectable through front panel keyboard).
Range	Full positive range of the selected thermocouple R and S type: 0 to 1768°C, B type: 0 to 1820°C or R and S type: 32 to 3210°F , B type: 32 to 3300°F.
Accuracy	Within +/-0.1% of the range
Resolution	1°C / 1°F (factory set to °C)
Cold Junction Compensation	Automatic using built in sensor from 10°C to 60°C.
Display	4 digit – 4” single-sided red seven-segment LED display (LMI-2014-1) 4 digit – 4” double-sided red seven-segment LED display (LMI-2014-2)
Measurement Time	2 to 9 seconds (user programmable)
Plateau Detection	1 to 99 °C (user programmable).
Peak Detection	1 to 1700 °C (user programmable).
Audio / Visual Alarm Indication	Provided for Thermocouple continuity, Measurement in progress, and Measurement Over using the built in lamps and speaker.
Retransmission Current Output	4-20mA proportional to the measured temperature (Optional). RLmax = 400 ohms.
Data Storage	Max. 100 readings of measurement are stored in the memory, which can be recalled on demand.
Power Supply	90-240 VAC, 50/60 Hz.
Connectors	Heavy duty Banana terminals are provided for thermocouple connection.
Enclosure	Dust free - Metallic powder coated.
Size	500(w) x 250(h) x 150(d)mm.
Weight	4 Kg approx. for LMI-2014
Mounting	Wall mounting key holes or Can be placed on a flat platform / shelf.

Sr. No.	Model	Specifications	Part No.
1.1	LMI-2014-1	Molten metal Temperature Indicator in 4-inch single-sided display with built-in Indicating Lamps and heavy-duty Pushbuttons	3520
1.2	LMI-2014-2	Molten metal Temperature Indicator in 4-inch double-sided display with built-in Indicating Lamps and heavy-duty Pushbuttons	3521

Product Category

Digital Indicators

Temperature Controllers

Data Loggers & Scanners

Temperature & Humidity Instruments

Thyristor Triggering Cards

Thyristor Power Controllers

Phase Angle Controllers

Zero Cross Over Switches

DC Rectifiers

Signal Isolators & Conditioners

Signal Isolator DC to DC Signal

Signal Isolator AC to DC Signal

Signal Isolator Temperature to DC Signal

Transmitters

Motor Controllers