Thyristor DC Drive for DC Motor (Four Wire/PMDC) – Panel Mount – TDM-1000-3HP

Product Description :

TDM-1000-3HP –D.C. Motor Drive ¼ HP to 3 HP with isolated speed control signal.
Size (mm) : 230 x 180 x 80
Part No : 2151

Fully solid-state design.
Linear variation of speed.
Suitable for 1/4 HP to 3 HP / single phase (4-wire or PMDC motors).
Adjustable maximum and minimum Speed.
Built in Current Limit / over Load Trip and Field Failure Protection.
Control signal is optically isolated in modular design.
Accepts speed control signal of (0-5) VDC, (0-10) VDC or (4-20) mA, hence suitable for machine automation.
1/4 DIN Size (TDM-10).
Operates on 230VAC.

Parametes	Description
Operating Supply Voltage	230 VAC / 115 VAC, 50 Hz, +/- 10%.
DC Output Voltage	1) Armature: 0 to 200VDC Field: 200 VDC fixed @ 230VAC. 2) Armature : 0 to 100VDC Field : 100 VDC fixed @ 115VAC
Motor Load in HP	0.25 to 5 HP with Armature / Field or PMDC
Speed Control Signal	(0-5) VDC, (0-10) VDC, (4-20) mA optically isolated or through 10K single turn potentiometer.
Operating Temperature	0 oC to 70 oC.
Maximum Current Rating	25% of the rated value (continuous).
Front Panel LED Indication	For Power ON, Current Limit and Trip Relay
Isolation	DC control signal are optically isolated from Field/Armature voltage (hence safe to interface with PLC PID controller, etc.)
Over Load / Over Voltage Protection	Using Current Limit and Trip features and individual Fuse protection for Armature and Field winding. Potential free TRIP contact is available on the terminals.
Speed Regulation	+/- 10% of set speed. By Armature Feedback.
Current Limit	50 to 150% of the rated value.
Maximum Speed	50 to 100% of the rated value.
Acceleration / Retardation	2 to 15 seconds ( adjustable soft start / stop ).
Remote Start/Stop	Provision for external potential free input contact for starting and stopping the motor.
Size	230 x 180 x 80 mm
Mounting	TDM-1000 can be mounted on the flat surface inside the control panel using 4 screws.
Weight	Approx. 2.5 to 3.5 Kg

Sr. No.	Specifications	Part No.
1.1	1/4 HP to 3 HP (200Watt to 2.2KW) DC Drive operating on 230VAC for PMDC motor with external speed control signal of 4-20mA/0-5VDC/0-10VDC. (Max. Armature Current = 12.5Amp)	2151-1
1.2	1/4 HP to 3 HP (200Watt to 2.2KW) DC Drive operating on 230VAC for 4 wire (Armature + Field) motor with external speed control signal of 4-20mA/0-5VDC/0-10VDC. (Max. Armature Current = 12.5Amp)	2151-2
1.3	1/4 HP to 3 HP (200Watt to 2.2KW) DC Drive operating on 115VAC for PMDC motor with external speed control signal of 4-20mA/ 0-5VDC/0-10VDC. (Max. Armature Current = 12.5Amp)	2151-3
1.4	1/4 HP to 3 HP (200Watt to 2.2KW) DC Drive operating on 115VAC for 4 wire (Armature + Field) motor with external speed control signal of 4-20mA/0-5VDC/0-10VDC. (Max. Armature Current = 12.5Amp)	2151-4

Digital Indicators

Temperature Controllers

Data Loggers & Scanners

Temperature & Humidity Instruments

Thyristor Triggering Cards

Thyristor Power Controllers

Phase Angle Controllers

Zero Cross Over Switches

DC Rectifiers

Signal Isolators & Conditioners

Signal Isolator DC to DC Signal

Signal Isolator AC to DC Signal

Signal Isolator Temperature to DC Signal

Transmitters

Motor Controllers