Temperature Indicator – DPI-966

Product Description :

DPI-966 – Temperature and Process Indicator.
Configuration : ( 1AI + 1AO &#43 1SO )
Size – 96 × 96 × 120
Part No – 1302

Microcontroller based Design.
Software linearized for better measurement accuracy.
Available in all standard DIN sizes.
Works on universal 90-240 VAC.
Universal and User selectable input from process transmitters/temperature sensors.
Industrial standard Analog and Digital Interface.

AI	Analog Input from Process transmitter in the form of 4-20mA or from the Temperature Sensors.
AO	Analog Output proportional to Analog input, available in the form of Retransmission output of 4-20mA or optionally 0 -10V.
SO	Serial Output in the form of RS-485 on MODBUS RTU interface.

Parametes	Description
Process Input	4-20mA or 0-10V
Display Range	-2000 to +2000 or 0 to 4000 count with programmable decimal point
Resolution	0.1,0.01,0.001
Temperature Input	Thermocouple type – J, K, RTD(Pt-100) or R, S, B thermocouple
Temperature Range	As shown in the Ordering Information table.
Resolution	1 °C for thermocouples and 0.1 °C for Pt-100.
Sampling rate / Display rate	The input is read @40mS / the display is updated @1 second.
Indicating Accuracy	+/- 1oC for Thermocouple throughout the range and +/- 0.1oC for Pt-100 for (4-20)mA or (0-10)V - absolute to the linear input signal
Display	4 digit 0.5" Red 7-segment display for process variable. 4 digit 0.5" Green 7-segment display for input type
Settings	Using Front panel feather touch key board to set various parameters like span HI/LO values, MODBUS slave ID, Input selection, calibration etc
Retransmission Output (Analog)	4-20mA linearized and proportional to the selected input type and range.
Digital Interface	RS-485 over MODBUS RTU protocol in Slave Mode.
Supply	(90VAC-250VAC), 50/60 Hz, 18 to 48VAC/DC (optional)
Size	96 x 96 x 120
Enclosure	ABS plastic with polycarbonate front graphic.

Sr. No.	Specifications	Part No.
1.1	Input : J,K,Pt-100,4-20mA	1302-1-1
1.2	Input : J,K,Pt-100,4-20mA with (4-20)mA retransmission	1302-1-2
1.3	Input : J,K,Pt-100,4-20mA with RS485 interface	1302-1-3
1.4	Input : R,S,B thermocouple	1302-2-1
1.5	Input : R,S,B with (4-20)mA retransmission	1302-2-2
1.6	Input : R,S,B with RS-485 interface	1302-2-3

Digital Indicators

Temperature Controllers

Data Loggers & Scanners

Temperature & Humidity Instruments

Thyristor Triggering Cards

Thyristor Power Controllers

Phase Angle Controllers

Zero Cross Over Switches

DC Rectifiers

Signal Isolators & Conditioners

Signal Isolator DC to DC Signal

Signal Isolator AC to DC Signal

Signal Isolator Temperature to DC Signal

Transmitters

Motor Controllers