Temperature Indicator – DPI-966-T

Product Description :

DPI-966-T – Temperature and Process Indicator.
Configuration : ( 2AI + 2AO + 1SO )
Size – 96 × 96 × 120
Part No – 1307

Microcontroller based Design.
Software linearized for better measurement accuracy.
Available in all standard DIN sizes.
Works on universal 90-240 VAC.
Universal and User selectable input from process transmitters/temperature sensors.
Industrial standard Analog and Digital Interface.

AI	Analog Input from Process transmitter in the form of 4-20mA or from the Temperature Sensors.
AO	Analog Output proportional to Analog input, available in the form of Retransmission output of 4-20mA or optionally 0 -10V.
SO	Serial Output in the form of RS-485 on MODBUS RTU interface.

Parametes	Description
Process Input 1 and 2	4-20mA or 0-10V
Display Range	-2000 to +2000 or 0 to 4000 count with programmable decimal point
Resolution	0.1,0.01,0.001
Temperature Input 1 and 2	Thermocouple type – J, K, RTD(Pt-100) or R, S, B thermocouple (Any one to be specified by User – and not user selectable)
Temperature Range	As shown in the Ordering Information table.
Resolution	1oC for thermocouples and 0.1oC for Pt-100.
Sampling rate / Display rate	The input is read @40mS / the display is updated @1 second.
Indicating Accuracy	+/- 1oC for Thermocouple throughout the range and +/- 0.1oC for Pt-100 for (4-20)mA or (0-10)V - absolute to the linear input signal
Display	4 digit 0.5" Red 7-segment display for 1st Input reading.4 digit 0.5" Green 7-segment display for 2nd input reading.
Settings	Using Front panel feather touch the keyboard to set various parameters like SPAN HI/LO values, MODBUS Slave ID, Input selection, calibration, etc
Retransmission Output (Analog)	4-20mA linearized and proportional to the selected input type and range. Available for each Input. (Optional)
Digital Serial Interface	Optically isolated 2 wire RS485 over Modbus RTU protocol. (Slave mode with programmable Modbus address). (Optional)
Supply	(90VAC-250VAC), 50/60 Hz, 18 to 48VAC/DC (optional)
Size	96 x 96 x 120
Enclosure	ABS plastic with polycarbonate front graphic.

Sr. No.	Specifications	Part No.
1.1	Input1 and Input 2 : J T/C with no interface	1307-1
1.2	Input1 and Input 2 : J T/C + Dual 4-20mA Retransmission	1307-2
1.3	Input1 and Input 2 : J T/C + RS-485 interface	1307-3
2.1	Input1 and Input 2 : K T/C with no interface	1307-4
2.2	Input1 and Input 2 : K T/C + Dual 4-20mA Retransmission	1307-5
2.3	Input1 and Input 2 : K T/C + RS4-85 interface	1307-6
3.1	Input1 and Input 2 : (Pt-100) with no interface	1307-7
3.2	Input1 and Input 2 : (Pt-100) + Dual 4-20mA Retransmission	1307-8
3.3	Input1 and Input 2 : (Pt-100) + RS-485 interface	1307-9
4.1	Input1 and Input 2 : (4-20)mA with no interface	1307-10
4.2	Input1 and Input 2 : (4-20)mA + Dual 4-20mA Retransmission	1307-11
4.3	Input1 and Input 2 : (4-20)mA + RS-485 interface	1307-12

Digital Indicators

Temperature Controllers

Data Loggers & Scanners

Temperature & Humidity Instruments

Thyristor Triggering Cards

Thyristor Power Controllers

Phase Angle Controllers

Zero Cross Over Switches

DC Rectifiers

Signal Isolators & Conditioners

Signal Isolator DC to DC Signal

Signal Isolator AC to DC Signal

Signal Isolator Temperature to DC Signal

Transmitters

Motor Controllers