Temperature Indicator – DPI-967

Temperature Indicator – DPI-967

Product Description :
DPI-967 – Temperature and Process Indicator.
Configuration : ( 1 AI + 1 AO + 1 SO )
Size – 96 × 96 × 120
Part No – 1305
AIAnalog Input from Process transmitter in the form of 4-20mA or from the Temperature Sensors.
AOAnalog Output proportional to Analog input, available in the form of Retransmission output of 4-20mA or optionally 0 -10V.
SOSerial Output in the form of RS-485 on MODBUS RTU interface.
ParametesDescription
Process Input4-20mA or 0-10V or Any other as required.
Display Range-1999 to +9999 / 0 to 19999 with programmable decimal point
Resolution0.1,0.01,0.001 count
Temperature Input Thermocouple type – J, K, RTD(Pt-100) or R, S, B sensor
Temperature RangeFull +ve range of the selected input type.
Resolution1 °C/0.1 °C for thermocouples and 0.1 °C/0.01 °C for Pt-100.
Sampling rate / Display rateThe input is read @40mS / the display is updated @1 second.
Indicating Accuracy+/- 1 °C for Thermocouple throughout the range and
+/- 0.1 °C for Pt-100 for (4-20)mA or (0-10)V - absolute to the linear input signal
Display 5 digit 0.5" Red 7-segment display for process variable.
5 digit 0.5" Green 7-segment display for Input type and others.
Settings Using Front panel Feather touch key board to set various parameters like Span Hi/Lo values,
MODBUS slave ID, Input selection, calibration etc
Retransmission Output (Analog) 4-20mA linearized and proportional to the selected input type and range.
Digital InterfaceRS-485 over MODBUS RTU protocol in Slave Mode.
Supply(90VAC-250VAC), 50/60 Hz, 18 to 48VAC/DC (optional)
Size96 x 96 x 120
EnclosureABS plastic with polycarbonate front graphic.
Sr. No.SpecificationsPart No.
1.1Input : Pt-100/4-20mA /0-10V with RS485 interface1305

Product Category

Scroll to Top