Loop Powered Temperature Transmitter – Field Mount – LTX-3000-W
Loop Powered Temperature Transmitter – Field Mount – LTX-3000-W
Product Description :
LTX-3000-W – Two-Wire Temperature Transmitter (In Weatherproof IP 65 enclosure and field mounted).
- Two wire design (supply and output on the same lines).
- Accepts RTD (Pt-100) / thermocouple / millivolt input.
- (4-20) mA non-isolated and isolated output.
- ZERO and SPAN adjustments for on-site calibration.
- Loop supply of 12 to 36VDC (with loop continuity LED).
- Saturation or open sensor current limited to 25Ma.
- Reverse polarity protection.
- Available in both Field mount and DIN rail mount versions.
- Special model ISO-12 for 4-20mA to 4-20mA isolation.
- Carry thermocouple or RTD signals over long distance without noise and loss of accuracy.
- Eliminates the use of a costly compensating cable.
- Useful for converting other mV/Ohms signal to equivalent 4-20mA loop.
| Parameters | Description |
|---|---|
| Input | Thermocouple, mV, RTD (Pt-100) or resistance signal from displacement, position or level sensor. |
| Range | Subject to specified input (User should specify the required range). |
| Output | (4-20) mA, two wire and loop powered (calibrated linearly to the input signal). Isolated or Non-Isolated, as per model. |
| Accuracy | ± 0.5 % to +/- 1% of the calibrated range or better including linearity, Hysterisis, and compensation error. |
| Calibration | On site using ZERO / SPAN presets (user settable using a small screw driver) Zero Adjustment: +/-25% of the range (20 Turns). Span Adjustment: +/- 25% of the range (20 Turns). |
| Loop supply (Vs) | 24VDC nominal (12 to 36) VDC for non isolated versions |
| Loop Status | The built in Red LED indicates the continuity status of the loop. LED will not glow if the current loop is broken. |
| Loop Resistance | 600 Ohms @ 24VDC (loop supply dependent). |
| Max. Load Resistance | RL Max = (Vs-12V) / 20 mA. |
| Isolation | Input and Output are Galvanically isolated (> 1KV) for isolated models |
| Burn Out Detection | The output shall saturate > 20mA (max. 25mA @ 24VDC loop supply) |
| Operating Temp. | 10 °C – 70 °C |
| Mounting | On-field or on site on the wall using 4 screws. |
| Sizes | 80 x 80 x 57 mm. |
| Sr. No. | Specifications | Part No. |
|---|---|---|
| 1 | SIMPLEX FIELD MOUNT TRANSMITTER – K TC | |
| 2 | INPUT : K TYPE T/C RANGE : 0 to 400 °C | 2003-1-1 |
| 3 | INPUT : K TYPE T/C RANGE : 0 to 600 °C | 2003-1-2 |
| 4 | INPUT : K TYPE T/C RANGE : 0 to 800 °C | 2003-1-3 |
| 5 | INPUT : K TYPE T/C RANGE : 0 to 1000 °C | 2003-1-4 |
| 6 | INPUT : K TYPE T/C RANGE : 0 to 1200 °C | 2003-1-6 |
| SIMPLEX FIELD MOUNT TRANSMITTER – RTD(PT-100) | ||
| 7 | INPUT : RTD Pt-100 RANGE : -50 to 100 °C | 2003-2-1 |
| 8 | INPUT : RTD Pt-100 RANGE : 0 to 150 °C | 2003-2-2 |
| 9 | INPUT : RTD Pt-100 RANGE : 0 to 200 °C | 2003-2-3 |
| 10 | INPUT : RTD Pt-100 RANGE : 0 to 250 °C | 2003-2-4 |
| 11 | INPUT : RTD Pt-100 RANGE : 0 to 300 °C | 2003-2-5 |
| 12 | INPUT : RTD Pt-100 RANGE : 0 to 350 °C | 2003-2-6 |
| 13 | INPUT : RTD Pt-100 RANGE : 0 to 400 °C | 2003-2-7 |
Product Category
Digital Indicators
- Temperature Indicators
- Large Display Temperature Indicators
- Portable Thermometers
Temperature Controllers
- Ramp/Soak Temperature Controllers
- Multi Zone Ramp/Soak Controllers
- PWHT/SR Controllers
- PID Temperature Controllers
- On-Off Temperature Controllers
Data Loggers & Scanners
- Temperature Data Loggers
- Temperature Scanners
Temperature & Humidity Instruments
- Temperature and Humidity Sensors
- Temperature and Humidity Transmitters
- Temperature and Humidity Indicators
- Temperature and Humidity Controllers
- Clean Room Monitoring Systems
Thyristor Triggering Cards
- Thyristor Triggering Cards
- Zero Cross Over Triggering Cards
- Capacitor Bank Switch Cards (RTPFC)
Thyristor Power Controllers
Phase Angle Controllers
- Single Phase Thyristor Power Controllers
- Two Phase Thyristor Power Controllers
- Three Phase Thyristor Power Controllers
Zero Cross Over Switches
- Single Phase Thyristor Power Switches
- Three Phase Thyristor Power Switches
- Three Phase SSR
DC Rectifiers
- Single Phase Thyristor DC Rectifier
- Two Phase Thyristor DC Rectifier
- Three Phase Thyristor DC Rectifier
- Capacitor Bank Switches (RTPFC)
Signal Isolators & Conditioners
Signal Isolator DC to DC Signal
- Signal Isolator DC to DC – AC Operated
- Signal Isolator DC to DC – 24 VDC Operated
Signal Isolator AC to DC Signal
- Signal Isolator AC to DC – AC Operated
- Signal Isolator AC to DC – 24 VDC Operated
Signal Isolator Temperature to DC Signal
- Signal Isolator Temp to DC – AC Operated
- Signal Isolator Temp to DC – 24 VDC Operated
- Signal Isolator Frequency to DC Signal
- Signal Isolator with Display
- Load Cell Signal Conditioners
Transmitters
- Temperature Transmitters
- Process Transmitters
Motor Controllers
- DC Motor Controllers
- Motor Soft Starters
- Molten Metal Pyrometers
- IoT Modules
- Instrumentation Control Panels
- Product Accessories